Buy Low Price From Here Now
The new 2130 has all the performance and features you have come to expect from the IR family of impact wrenches. This Impact features a powerful twin hammer mechanism and a new composite housing, yielding superior ergonomics in lightweight package. 1/2-Inch Drive Heavy Duty Air Impact Wrench - 600 Ft/LbThe new IR2130 has all the performance and features you have come to expect from the IR family of Impact Wrenches. This Impact features a powerful twin hammer mechanism and a new composite housing, yielding superior ergonomics in a lightweight package. 600 ft./lbs. of maximum Torque. Full stroke tease throttle. Easy glide forward/ reverse switch. Multi position power management. Lightweight reinforced aluminum hammercase; weight only 4.2 lbs.
Readmore
Technical Details
- Offers 550 feet-per-pound of maximum Torque- Full stroke tease throttle
- Easy glide forward/ reverse switch
- Multi position power management
- Lightweight reinforced aluminum hammer case
See more technical details
By Melrose
This tool takes the place of a lower-torque 200 fps, bottom-line unit, unable to remove high-torque fasteners. I run this off a small capacity 4.2 scfm double hotdog tank unit, and it performs great, for my intermittent use. It's light weight gives it great versatility, and the easy lever torque adjustment puts it head and shoulders above competitors. I needed this to remove force fit self-locking nuts on the driveshaft and CV joints. Five-hundred fifty foot pounds of reverse torque does the job - just fine.
By Cecil (Indiana USA)
I bought a cheapo air compressor at a yard sale and wanted to buy an impact to use with it. I decided to spend the money on a good impact and went with this one. I cannot say enough good about it. I do simple car repairs at home on our vehicles and this goes above and beyond in fulfilling my needs. I have no doubt it will last me the rest of my life. Spend the $$ and never have to worry about an impact again. These days it is rare to buy a product that is well built and does the job, this one makes the grade. In case you are concerned this impact works great with a $200 Sears air compressor. You don't need an expensive compressor to run it.
By K. Chiew (Metro Detroit)
I purchased this impact wrench to replace a very old Craftsman hand me down which doesn't have adequate power. The wrench is finished in very nice composite body with the air ports at the handle of the wrench. Power setting is established with a dial on the rear of the unit. There is a direction switch just below the dial setting. The trigger is very responsive and has variable power delivery. It fits 1/2 inch impact sockets perfectly and has a design where it grips the socket so it doesn't fall off easily.
The very first time I used this was to loosen up axle nut on a 7 year old car driven in the Northern USA climate (salt + road grime). I would presume the torque delivery was very close to its maximum, but after 2-3 seconds of hammering, the axle nut came loose. Pretty impressive. I loosen up both side of the FWD axle in one minute. It saved me time, my back and possibly my knuckles if I would have it done manually with an extra long breaker bar.
The wrench has a very nice balance and is pretty lightweight for its size and torque delivery. Please adhere to its minimum air delivery and pressure (make sure your compressor is up to snuff). The wrench is not so quiet, but I usually use ear plugs around these things anyway. For the price + power delivery + quality of construction, I would comfortable rate it at 5 stars.
By G Leftwich (Madison Heights, Michigan USA)
Very nice tool, small and light weight. Just right for home use, plenty of power.
By Walter Beynon (Hawaii)
A pleasure working with this tool no problems
should have obtained this tool many years ago
Images Product
Buy Ingersoll-Rand 2130 1/2-Inch Heavy-Duty Air Impact Wrench Now
