Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler

Buy Cheap Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler

Buy Low Price From Here Now
The Porter-Cable US58 1/4-Inch to 5/8-Inch, 22-Gauge C-Crown Upholstery Stapler is an easy to use pneumatic stapler with plenty of useful features. It uses standard Senco C Type 22-gauge, 3/8-inch crown staples to get the job done right, and it includes a 1-inch nose extension for those tough to reach areas. The high-capacity bottom-load magazine handles 185 staples, and the driver guide moves back to easily clear jams from the magazine. The US58 stapler requires 70-120 PSI air pressure, so it will work with most air compressors.
Readmore

Technical Details

- High-capacity pneumatic upholstery stapler with 185 staple magazine
- Uses Senco C Type, 22-gauge, 3/8-inch staples from 1/4 to 5/8 inches long
- Quick and easy jam-clearing mechanism
- Measures six inches tall and nine inches long; weighs 2 pounds
- Includes a 1/4-inch air fitting with dust cover and oil
See more technical details

 "Porter-Cable Upholstery Stapler" 2010-07-23
By Jeffer
Lots of products out there to meet this need. Porter's unit is well built, feels solid, easy to operate, and a great entry price-point. I'm not a professional upholstery fabricator, I'm re-doing my boat upholstery and am using this unit with my Porter-Cable compressor, using 3/8" x 3/8" stainless steel staples and it's been great. And I'm confident that I could complete my job, and turn it around in near new condition on EBay and get 80-90% of my money back!



One hint, adjust the air on your gun and test staples. At the higher end of the range it'll set the staples so far that the fabric will pull out (depending on your material and base). I had to run it on the lowest setting in the recommended range, which was as low as my regulator would adjust.



I definitely recommend this unit. Also, great vendor as well!

 "This is a Pro Stapler for sure!" 2010-01-22
By W. Gravning
Like any well made product the Porter Cable Upholstery Stapler is absolutely a delight to use. The 1" long extension is a must for anyone working on upholstery projects. We used it recently on some oak chairs using 3/8" fine wire staples from Amazon at 70psi. Follow the instructions and you should have no problems.

 "Performed Flawlessly" 2010-01-17
By Rodney McQueen (Illinois, USA)
Have done various reupholstering projects through the years and had always hand stapled. What a difference this this tool made! It reduced the time required to complete the project and greatly improved the quality of the work. It did not "misfire" once. It is lightweight and easy to use. I highly recommend the tool, at least for home use.

 "excellent stapler" 2009-11-16
By yayamama (Western PA)
I bought this to replace one exactly like it that I have been using for 7 years. It broke because I FORGOT to oil it and the inside rusted....In conclusion take care of your tools and this is an excellent one.

 "WOW, great tool and Recommded" 2009-11-05
By Electric Z (Oregon)
Upon receiving this stapler I was using it within 10 minutes of the UPS delivery. It came with the air fitting already installed. I slapped some 1/2" staples in it and I was off working. It has a great ergonomic handle that feels great in your hand and is lightweight. My wife likes it too!



The stapler is of the high Porter-Cable expected quality. It made short work of my first project and expect many more hours of use. This tool is made for working. As fast you can pull the trigger the staples are set deep and no jamming. Recommended and the price was very reasonable.



Here it is a month later and wanted to add a couple thoughts since first purchase. First, it is working great and I am very happy.



Next, some have commented about a possible safety feature missing in that staples can be freely shot out, (no device needs to be pushed against the object being stapled first). After using it a lot, quite frankly I would find it a nuisance if there was such device. When working with fabric or some other material it would be a major impediment to have to reposition the stapler, push down and then pull the trigger. When stapling many staples with its current design you can just slide the stapler to the next position pull the trigger and move on. Much more efficient and faster.


Images Product

Buy Porter-Cable US58 1/4-Inch to 5/8-Inch 22-Gauge C-Crown Upholstery Stapler Now

Neiko Pocket Size Close-Quarters 1/4-Inch Drive Mini Ratcheting Screwdriver and Bit Set

Buy Cheap Neiko Pocket Size Close-Quarters 1/4-Inch Drive Mini Ratcheting Screwdriver and Bit Set

Buy Low Price From Here Now
Phillips: #1, #2, #3. Slotted: 4.5MM, 7MM. Star: T15, T20.
Readmore

Technical Details

- This mini ratchet driver help you get to the "hard-to-reach" spot
- No need to remove obstruct parts away during work
- An essential tool for your tool box and compartment
- Includes 7 commonly-used bits in Chrome-Vanadium steel
See more technical details

 "Good value. Similar to Craftsman, but not quite as versatile." 2010-03-06
By Dave - Free as Can Be (Franklin, TN)
I have used this product and it is fine for limited use. The metal from which the bits are cast seems a little soft and accordingly is likely to wear more quickly. I probably should not include the rest of my opinion in this Amazon review however, Sears has a Craftsmen set which contains 3 ratchets instead of one, and includes 4 different bits that are made of a harder metal, all at a fairly reasonable, but higher price. The big difference is that the Craftsman set, which I have had for a number of years, supplies a straight ratchet that is similar to the ratchet sold herein plus 2 angled ratchets, the heads of which are roughly +35 degrees and -35 degrees from the straight ratchet. This makes for a versatile set of ratchets that can accommodate much more difficult to reach screws. I have used the Craftsman set many times and mentally thank my wife for the foresight of giving me this Christmas stocking present each time I use it because many times I have no tool that is a good alternative. I found that the Craftsman set was so valuable that I bought an extra set for myself, and also gave sets to my son and to my son-in-law.



While there is nothing really wrong with the ratchet set being sold here, and it is a good value for limited use, I would suggest that you check out the Craftsman set first. I have written a number of reviews in which I recommended a product sold by Amazon. However, in this rare instance, I believe their selections do not include sufficient alternatives for their wide range of customers.

 "great for doorknob installation" 2010-02-27
By rprice54 (USA)
this is one of those "why didn't I think of that" tools. I bought it specifically because I had a bunch of doorknobs to install and it works well- except the bits fall out quite easy, which is frustrating when working in a tight space. otherwise it gets the job done.

 "nice 'lil friend" 2010-01-24
By Endang (Pennsylvania)
Finally I found this lil friend and use it for my son's crib

it's made in Taiwan and it works, you just have to get used to it.

 "Literal Rip-off" 2009-11-28
By S. Lbck
I ordered this through Amazon. On arrival this item's protective packaging had been ripped open. One of its seven bits was missing. To me ,it's not worth the hassle of returning it.



This is a nifty item: If it had arrived intact I would have given it four or five stars.

 "Great Tool!" 2009-11-14
By B. Butler (North Carolina)
I bought this tool to put some mud guards on my car and had to deal with screws directly behind the back wheel. This worked great! Small, but powerful. Highly recommend!


Images Product

Buy Neiko Pocket Size Close-Quarters 1/4-Inch Drive Mini Ratcheting Screwdriver and Bit Set Now

Hitachi NT50AE2 18-Gauge 3/4-Inch to 2-Inch Brad Nailer

Buy Cheap Hitachi NT50AE2 18-Gauge 3/4-Inch to 2-Inch Brad Nailer

Buy Low Price From Here Now
The lightweight Hitachi NT50AE2 2-Inch 18-Gauge Brad Nailer is an ideal tool for a small carpentry projects. Featuring a high-capacity magazine, exhaust vent, easy depth-of-drive adjustments, and a removable nose cap for prolonged tool life, this pneumatic brad nailer will help you tackle everything from cabinet installation and picture-frame assembly to furniture construction and finish work.

This brad nailer offers dual firing options and a high-capacity magazine for efficiency. View larger.

NT50AE2 2-Inch 18-Gauge Brad Nailer Tool Features Intermittent or continuous firing Tool-less depth-of-drive adjustment Lightweight, ergonomic design 360-degree adjustable exhaust vent No-mar nose cap

Safety glasses, a mounted nose cap, and a protective case are included. View larger.

Dual Firing Options for Precise or Continuous Driving
Featuring selective actuation for making tool-less firing transitions, the NT50AE2 Brad Nailer can be used for a variety of different applications. By simply sliding the selection control up or down with your hand, you can choose between intermittent and continuous firing. Intermittent firing is ideal for jobs that require precise driving, while the continuous setting can be used to fire nails at a rapid pace by using a bumping motion along the workpiece.

Adjustable Depth of Drive for Accuracy
The NT50AE2 features a convenient depth-of-drive adjustment knob located near the nose. Simply turn the dial half way to make quick, accurate modifications to the driving depth with no tools required.

High-Capacity Magazine for Reduced Downtime
For further convenience, the NT50AE2 features a bottom-loading magazine that's designed for quick and easy loading of 5/8-2 inch brad nails with head sizes between 0.075 and 1.9 mm. The magazine has a capacity of approximately 100 brad nails (depending on the size of the nail), so you can go a long time between reloads. A visual nail indicator allows you to keep an eye on the number of nails in the magazine.

Designed for Comfort and Efficiency
With a lightweight aluminum body, the NT50AE2 weighs just 2.2 pounds and measures 10 x 9-3/16 x 2-3/8 inches (LxHxW)), so it's easy to maneuver. Its soft Elastomer grip provides optimum control and extended comfort for all-day jobs.

For further ease of use, Hitachi equipped the NT50AE2 with an adjustable, 360-degree exhaust vent. Also, an included no-mar nose cap protects the workpiece and the tool.

The NT50AE2 requires 70-120 psi operating pressure to function properly. It takes in air at a rate of 0.025 cubic feet per cycle at 100 psi.

The Hitachi NT50AE2 Brad Nailer is backed by a five-year limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
NT50AE2 Brad Nailer, safety glasses, nose cap (mounted on tool), and protective case.

Readmore

Technical Details

- Finish nailer accepts 5/8- to 2-inch 18-gauge brad nails
- Depth of drive dial for a professional finish
- Quick and simple nail jam extraction
- Includes safety glasses, air fitting, hex bar wrenches, carrying case, no-mar tip
- Measures 10-inches by 9.25 inches (LxH); lightweight and well-balanced at 2.2 pounds
See more technical details

 "Top nailer!" 2010-03-03
By Nathan Boris (Hood River, OR United States)
Have not used the gun long enough to tell you about durability but it rather similar to it's big brother- Hitachi NT65MA2 15 Gauge 1-1/4-Inch to 2 1/2-Inch Angled Finish Nailer(which I have plenty of hours on over the years)but with minor but important upgrade- side loading of nails. This may not seem important to some but on many trim applications you are not always using the same length nail. You can have several guns on your hip or you swap out the nails to fit the application. Side loading offers a couple of advantages - can easily remove and install (compared to rear loading) and it is easy to determine what length nail is in the gun. This will save you big time - in frustration and time!



Other features - good line of sight, jamb release (never jambed yet but it is there), fire modes (really? for trim?) adjustable exhaust, normal stuff any nail gun should have. I now have many of the newer Hitachi stuff to mate with some of the old and cosmetics don't really matter to me - they all work flawlessly. As long as they keep doing that I am happy. At this price it is a no brainer - get it!

 "Nice all around gun." 2010-02-25
By B. HOLM (south bay CA)
This is an all around good gun. Not the best of the best but it does a great job. I own a few others of diff brands but this one is the loudest. It does not have a belt hook but easily added on. Nice and light.

 "Great brand nailer" 2010-01-27
By Deyvi Zamero
I love this nailer. It is very easy to use and it never jams.

I recommend it to everybody.

 "no problems with this gun" 2010-01-25
By Jeffrey M. Sible (hopwood pa. usa)
used this brad nailer for over a thousands nails sizes from 1/2 inch to 2 inch, not one jam or problems, i oil before each use, 10 drops, had it for three months, and it has worked perfectly so far, love this gun, 70 dollars is a bargain for this item, used different brad nails from lowes and home depot, including ones with a brown colored tip without a jam, don't know how easy it is to clear a jam if i get one, read the instructions and seem easy, hopefully ill never have to find out...

 "Refurbished Version Puts Half-Circle Shaped Dents in Wood" 2010-01-01
By B Jones
Just got this not long ago. Did some test firing in junk 2x4's. Turning down the pressure reduces the dents but does not guarantee the pin will sink all the way. Any suggestions. Are the new ones any better?


Images Product

Buy Hitachi NT50AE2 18-Gauge 3/4-Inch to 2-Inch Brad Nailer Now